Availability: In Stock
206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working and cure time is needed or to provide adequate working time at higher temperatures. When combined with 105 Resin in a five-part resin to one-part hardener ratio the cured resin/hardener mixture yields a rigid high-strength moisture-resistant solid with excellent bonding and coating properties.
Pot Life at 25C:20 to 30 minutes
Cure to a solid state at 21C: 9 to 12 hours
Cure to maximum strength at 21C:5 to 7 days
Minimum recommended temperature: (16C)
Guaranteed Safe Checkout
Bondloc B542-50ml hydraulic thread sealant is medium-strength and fast-curing. This hydraulic thread sealant provides an instant...
Bondloc B577-50ml Pipeseal thread sealant will seal all kinds of threaded connections. The medium-strength pipe sealant...
Bondloc B270-50ml studlock is a high strength threadlocker designed for permanent locking of studs up to...
Bondloc B243-50ml oil-tolerant, medium strength threadlocker is designed for direct application onto "as received parts" where...
Bondloc B222-50ml low strength threadlocker is designed for small fasteners, where vibration-loosening prevention and non-leakage through...
Bondloc B7782-500 gasket remover aerosol is a powerful blend of non-chlorinated/dichloromethane free solvents that have been...
Bondloc B7455-200 activator for the rapid curing of cyanoacrylates both pre- or post- application to the...
Bondloc B7649-200 anaerobic activator is a solvent based activator aerosol designed to increase cure speed on...
Bondloc B574-50ml instant gasket solution is an instant gasket former making almost any size and shape...
Bondloc B518-50ml gasket solution is a flexible, medium-strength gasketing material, recommended for use on rigid iron,...
Successfully Added to your cart