Scanstrut SPD-4XI-W Deck Pod is designed for either 4 standard navigation instruments and autopilots or 2 standard instruments and a 7" display. The Deck Pod allows you to install your instruments on virtually on any flat surface onboard. This allows you to have your instruments in the prime position while out sailing on your sailing boat. With the pull of a lever, the intuitive design gives you a 360-degree viewing angle to make the most from what your instruments have to offer.

Scanstrut Deck Pod SPD-4XI-W fits the following devices:

Chartplotters & Fishfinders:

- B&G Vulcan 7 (without flush mount), Zeus Touch 7 & Zeus2 7

- Furuno GP-1871F

- Garmin EchoMap 7 Series, EchoMap Plus 6, EchoMap Plus 7, EchoMap UHD 6", EchoMap UHD 7", GPSMap 720 / 720s, GPSMap 722 / 722xs, GPSMap 740 / 740s, GPSMap 750 / 750s, Striker 5, Striker 7, Striker Plus 5 , Striker Plus 7, Striker Vivid 5cv, Striker Vivid 7cv & Striker Vivid 9sv

- Lowrance Elite 5, Mark 5, Elite 5Ti, Elite 7, Elite 7 Ti / Ti2, HDS-5 / HDS-5m / HDS-5x, HDS-7 / HDS-7m, HDS-7 Carbon, HDS-7 Gen 3, HDS-7 Live, HDS-7(m) Gen2 Touch & HOOK 7 / 7x

- Raymarine A65 / A67 / A68, A75 / A77 / A78, Axiom 7, Axiom 7+, E7 / E7D, Element 7 HV & Element 7 S

- Simrad AP48, Cruise 5, Go5 XSE, Go7 (without flush mount), Go7 XSR, NSS-7 & NSS-7 evo2

Instruments & Autopilots:

- B&G 10, 10 HV, Triton & Triton²

- Furuno FI-50 STD Instruments, NAVpilot-300 & NAVpilot-711C

- Garmin GMI 10, GMI 20, GNX, GNX 20 & GNX 21

- Nexus NX, NX2 Digital & NX2 Analogue

- Northstar Explorer 310 Instruments

- Raymarine i70, p70, p70r, ST290 Analogue, ST60+, ST70 & T100 Series

- Simrad AP24, AP44, IS20, IS35 Digital Gauge, IS42 Digital Display, IS42J Digital Gauge & IS70 / IS80

- Tacktick Maxi Display T100 Series

- Swivel & Tilt Base: One-handed quick-release action. Simply release the lever, swivel & tilt to suit your requirements before locking back into position.

- Best Viewing Angle: An adjustable ball joint allows a range of movement & multiple mounting angles.

- Added Strength: Inner bracing plate secures the deck pod base to the pod & gives increased rigidity to the assembly eliminating potential damaged from shock & vibration.

- Overhead Mounting: Deck Pod models can be overhead mounted.

- Hassle-Free Install & Service: Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick & safe install & repeat servicing.

- Increased Protection: Deck Pod seal is made from a high tear strength silicone, it has a very high resistance to heat & UV so you can have confidence that it won’t deteriorate over time.

- Supplied Uncut: As standard you will receive your Scanpod uncut. For a small charge factory cutting service is available.