A pack of 2 Aqua Cure standard spun polypropylene pre-filter cartridges designed to give a high dirt loading at and above a nominal 5 micron rating.

These 9-7/8" long filters are suitable for any 10" standard or slimline filter housing.

These quality water filters feature thermally bonded micro fibres of pure polypropylene, which allows higher flow rates with lower pressure drops, whilst retaining high efficiency. There are no additives, resin binders or release agents used in the construction of the filters. The cartridges are manufactured in compliance with NSF requirements and designed to remove sand, silt, dirt and rust particles that affect the water taste and appearance. For water use only, flush through for 5 minutes before using.

The material and graded density makes these cartridges ideal for light industrial applications as well as in domestic water filtration.

Use: Sediment Filtration

Filter Type: Spun

Overall Dimensions: Length 250mm (9-7/8") x Diameter 69mm (2.71")

Filter / Cartridge Lifetime: These filters have no set capacity. Change out should take place when either the flow rate or pressure differential across the filter element are unacceptable.

Minimum water temperature: 1°C / 34°F

Maximum operating temperature: 63°C (145°F)

Minimum working pressure: 0.5 bar (7.5 psi)

Maximum working pressure: 8.75 bar (125 psi)