Scanstrut SPH-8-W ScanPod Helm Pod is designed for mounting your display right where you need it. The Helm Pod fits pedestal rails from 25mm to 33.7mm (0.98" - 1.33") in diameter. This allows you to have your display in the prime position while out sailing on your sailing boat.

Scanstrut Helm Pod SPH-8-W fits the following devices:

Chartplotters & Fishfinders:

- B&G Vulcan 7 (with & without flush mount), Vulcan 9, Zeus Touch 7, Zeus Touch 8, Zeus2 7, Zeus3 7, Zeus3 9, Zeus3s 7 & Zeus3s 9

- Furuno GP-1870, GP-1871F, GP-1971F, O-Chart 5/5F & O-Chart 7/7F

- Garmin EchoMap 74sv, 73sv, 74dv, 73dv, EchoMap 9 Series, EchoMap Chirp 75dv / 75sv, EchoMap Chirp 95sv, EchoMap Plus 6, EchoMap Plus 7, EchoMap Plus 9, EchoMap UHD 9", GPSMap 720/720s, GPSMap 722/722xs, GPSMap 740/740s, GPSMap 7407/7607, GPSMap 7408/7608, GPSMap 743xsv, GPSMap 750/750s, GPSMap 820/820xs, GPSMap 840/840xs, GPSMap 922/922xs, GPSMap 923, GPSMap 943xsv, Striker Plus 5 , Striker Plus 7, Striker Plus 9 & Striker Vivid 9sv

- Humminbird 800 series, 900 series & Helix 7

- Lowrance Elite 5 / Mark 5 / Elite 5Ti, Elite 7, Elite 7 Ti / Ti2, Elite 9 Ti / Ti2, Elite FS 7, HDS-5 / HDS-5m / HDS-5x, HDS-7 / HDS-7m, HDS-7 Carbon, HDS-7 Gen 3, HDS-7 LIVE, HDS-7(m) Gen2 Touch, HDS-8 / HDS-8m / Gen 2, HDS-9 Carbon, HDS-9 Gen3, HDS-9 LIVE, HOOK 7 / 7x, HOOK 9 / 9x & HOOK Reveal 9"

- Northstar Explorer 6 & M84

- Raymarine A50/50d, A57d, A65/A67/A68, A70/70d, A75 / A77 / A78, Axiom 7, Axiom 7+, Axiom 9, Axiom 9+, C Series - C70, C95/C97, E95/E97, Element 9 HV, Element 9 S & ES 75/77/78

- Simrad AP48, Cruise 5, Cruise 7, Cruise 9, GB40 10" Monitor, Go5 XSE, Go7 (with & without flush mount), Go7 XSR, Go9, Go9 XSE, NSS-7, NSS-7 evo2, NSS-8, NSS7 evo3, NX40 & R2009/S2009

Instruments & Autopilots:

- B&G Nemesis 9

- Maretron TSM810C

- Northstar Explorer AP380

- Universal helm fixing: Fits pedestal rails 25mm - 33.7mm (0.98" - 1.33") OD.

- Secure & watertight install: Saddle system supports the stainless tubing enabling a secure & rigid fit onto any pedestal & also ensures a watertight seal at cable entry.

- No drill fixing kit: Customised U-bolts fit around the rail & through the saddles into the back of the pod eliminating the need for time consuming & awkward drilling of the stainless rail.

- Hassle-free install & service: Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick & safe installation & repeat servicing.

- Increased protection: Pod seal is made from a high tear strength silicone, it has a very high resistance to heat & UV so you can have confidence that it won’t deteriorate over time.

- Supplied uncut: As standard you will receive your scanpod uncut. For a small charge Scanstrut offer a factory cutting service.