Fuel flow sensor with 10ft cable and T-connector.

Outputs:

• Fuel Flow

• Tank Fuel Used

• Trip Fuel Used

• Seasonal Fuel Used

Specs:

• One required per engine

• Up to 3 engines supported

• Fuel line diameter: 3/8" (9.5 mm) ID

• Flow rate measured: Optimized for 0.6-45 Gal/hr but can measure outside these values

• Added back pressure to the fuel system: 0.5 PSI at 20 Gal/hr; 1 PSI at 40 Gal/hr

• Installation location: Above the max level of the fuel tank, in-line after the fuel filter and any Y's or T's in the line

• Fuel type: Gasoline only*

• Hole required to route through a bulkhead: 22mm (7/8")

• Multiple fuel flow sensors possible

*Please note: The Fuel Flow Sensor does not operate diesel engine fuel systems.